Choose the arrangement below and add the details you have.
Configuration choices
Distribution role
Main or sub-distribution, lighting and equipment supplies.
Mounting
Wall or floor mounting, enclosure access and cable entries.
Panel function
Incoming protection, outgoing circuits, terminals and identification.
Information to provide
Supply voltage requested
System voltage, phases and circuit load schedule.
Protection information
Circuit currents, protection requirements and spare ways.
Installation
Available dimensions, mounting surface and installation environment. Include EPC/MEP interface requirements and the actual installation and ambient conditions.
02 Application engineering
Applications
01
Lighting and final circuits
Floor and area distribution boards divide the supply into lighting, socket and dedicated equipment circuits. A circuit schedule establishes load allocation, phase balance and spare ways. Protective devices, residual-current protection where required, neutral arrangements and clear circuit identification are selected for the connected loads and earthing system.
02
Local industrial distribution
Sub-distribution boards supply workshop equipment, maintenance outlets and auxiliary loads close to the point of use. Feeder and branch protection must coordinate with the upstream board and suit the local fault level. Load duty, cable entries and accessible isolation determine the circuit arrangement and enclosure dimensions.
03
Pump rooms and outdoor services
Boards for pumps, external lighting and service equipment need an enclosure suited to the installation location. Rain, dust, condensation and corrosion influence material, protection and cable-entry choices. Mounting position, maintenance access and the load schedule should be established before specifying the completed board.
03 Select your configuration
Select your configuration
All fields are optional. Choose one or more options as indicated; use Other for a custom requirement.
Distribution role
Select all that apply.
Mounting
Select one option.
Installation
Select one option.
Cable entry
Select all that apply.
Additional requirements
Supply voltage requested
Enter details
Current requirement (A)
Enter details
Enclosure requirement
Enter details
Component preference
Enter details
Supply frequency
Enter details
Current requirement (A)
Enter details
Electrical values entered here are requested requirements. Equipment ratings must match the selected model and its technical datasheet.
04 Construction and options
Technical options
Protection information
The incoming device must suit the supply and required isolation.
Panel function
Outgoing devices are selected for each load and circuit duty.
Mounting
Mounting and door access must match the installation location.
Metering
Meters and indicators are specified by the quantities and signals required.
Wiring diagram
Wire and terminal identifiers must correspond to the circuit drawings.
Cable entry
Cable entries and enclosure protection are defined for the installation environment.
05 Applicable standards and requirements
Standards
Project specification
Technical references: IEC 61439-1 / IEC 61439-2 / IEC 61439-3. Confirm the applicable part and edition against the intended use and the proposed assembly documents. IEC 61439-3 applies to distribution boards intended for operation by ordinary persons within its scope; industrial assemblies require the appropriate product part. Installation reference: KAHRAMAA Low Voltage Electricity Wiring Code 2018.
Rating schedule
Confirm model ratings and installation limits from manufacturer documents.
Verification documents
Request verification and inspection records for the exact configuration.
Supply scope
Specify equipment, components, engineering, software and documents separately; the quotation confirms included items.
Send the following project information: System voltage, phases and circuit load schedule. Circuit currents, protection requirements and spare ways. Available dimensions, mounting surface and installation environment.
